News

Effervescent tablets and powders often contain sodium bicarbonate and citric acid. Added to water, they mix to produce bubbles of colourless carbon dioxide gas. The carbon dioxide mixes with the air. Main use is because it makes some medications easier to take in liquid for but also you can get Vitamins that have Efferves it distributes the medicine or vitamins more evenly and you get some hydration in the process! effervescent tablet tube Effervescent medicinal beverages date back to the late 1800s and originally arose to mask the taste of bitter waters taken as curatives, during the water cure craze of that era. Vitamin tablets may be sold as effervescent tablets. Alka-selzer is an antacid and pain reliever sold as an effervescent powder. There are several categories of active ingredients that may be best administered in the form of effervescent preparations: 1.Those that are difficult to digest or disruptive to the stomach or esophagus 2.Those that are pH–sensitive, such as amino acids and antibiotics. 3.Those requiring a large dose. 4.Those that are susceptible to light, oxygen, or moisture.

The effervescent tube is a barrel-shaped special packaging, which is mainly used for pharmaceutical packaging effervescent tablets and some tablets with larger dosage forms. When pharmaceutical companies choose effervescent tube manufacturers, most of them only consider the quality and cost-effectiveness of the packaging, and it is easy to ignore their qualifications and their own strength. High-quality effervescent tube manufacturers should consider the following aspects. effervescent tablet tube 1. Manufacturer qualification In China, in addition to the business qualifications of enterprises, according to the "Administrative Measures for Pharmaceutical Packaging Materials and Containers (Interim) (Bureau Order No. 21)", pharmaceutical packaging materials must be registered by the drug regulatory authority and obtained the "Registration of Pharmaceutical Packaging Materials" It can be produced only after the certificate. If medicines need to be exported abroad, they need to pass foreign filings, such as EU certification, US DMF filing, etc. 2. Manufacturer strength Manufacturer qualification is the basic requirement for pharmaceutical packaging material manufacturers. Secondly, it depends on the strength, such as whether the production equipment is advanced, whether the production process is mature, whether it has a high-standard clean workshop, whether the production scale can meet the needs of pharmaceutical companies, etc. The side reflects the strength of the manufacturers, and the strong manufacturers are more secure in product quality control and later service. 3. Product quality and cost performance The quality of the effervescent tube is a point that pharmaceutical companies need to pay special attention to. While meeting the requirements of national standards, it must meet the characteristics of the drug. Cost-effective packaging is the constant pursuit of pharmaceutical companies. On the basis of satisfying the above conditions, the cost-effectiveness of the effervescent tube should be considered. Of course, when pharmaceutical companies choose effervescent tube suppliers, they generally put the product quality and cost-effective factors in front, but no matter which factor is considered first, the manufacturer's qualification and strength are still important factors that cannot be ignored.

Vitamin C effervescent tablets are a common vitamin supplement that is very popular among young people. There are many manufacturers of vitamin C effervescent tablets on the market, and the phenomenon of product homogeneity is serious. In this context, the effervescent tube has become the key for pharmaceutical companies to break through the bottleneck of product development. effervescent tablet tubes Product competition is not only the competition of the product itself, but also the competition of the entire company and the competition of brands. When vitamin C effervescent tablets have similar taste and safety, the difference in packaging becomes a direct manifestation of product differentiation. Even two products with the same common name will have different market performance due to differences in packaging. The effervescent tube is a special pharmaceutical packaging for vitamin C effervescent tablets. The effervescent tablet contains a disintegrant and is easily deteriorated by moisture. In order to ensure the dryness of the tablet, a desiccant made of silica gel and molecular sieve is placed inside the effervescent tube . Different from ordinary medicine bottles, the desiccant is stored on the top of the lid to prevent children from accidentally ingesting. The spiral spring on the lid can protect the tablet from damage due to various external forces. In order to highlight the differentiation of brands and distinguish competing products, some pharmaceutical companies will use the color, logo, slogan, etc. of the effervescent tube to reflect it. For example, use different caps for different flavors of effervescent tablets, and add eye-catching slogans on the external label. In short, differentiation is a weapon for companies to break homogeneity. Only when there are differences can there be a market, and only then can they gain a place in the competition among the strong players.

Effervescent tablets are a kind of solid beverage, which will disintegrate quickly when exposed to water. Therefore, the moisture-proof performance of the effervescent tube is stricter. If the inside of the package is damp and the tablet disintegrates, it is mostly related to these factors. effervescent tablet tube Moisture-proof is the basic requirement for the pharmaceutical packaging of medicines, especially for some solid medicines. Once the inside of the packaging gets damp, it will easily lead to deterioration or failure of the medicine. If the patient takes the deteriorated medicine by mistake, it will endanger the health of the body. If the inside of the effervescent tube is damp, first consider whether the tightness of the packaging is qualified. The tightness of the effervescent tube mainly depends on the precision of the mold and the control of each production link. Packaging materials generally have moisture barrier properties, which can block the intrusion of external water molecules. However, if the seal is not tight, it is easy to cause water vapor to penetrate into the packaging and make the medicines damp and deteriorate. On the other hand, also consider the amount of desiccant. The desiccant inside the effervescent tube is mainly a mixture of silica gel and molecular sieve. The drying performance of the desiccant itself is almost the same. If the packaging is well-sealed, the interior of the effervescent tube is still damp, which may be due to dryness. The dosage of the agent is not enough to completely absorb the moisture of the medicine itself, so you can consider increasing the dosage of the desiccant. In addition, the moisture inside the effervescent tube is also related to the external storage environment. If the external environment is too humid, it is easy to get moisture inside the package. Therefore, when storing the product, choose a dry and ventilated place as much as possible. The above is the analysis of several main reasons for the internal dampness of the effervescent tube. High-quality packaging is the basic requirement for drug storage. When purchasing effervescent tubes, pharmaceutical companies should pay attention to the product quality while paying attention to the impact of the external storage environment on the drugs.

The effervescent tube is a special packaging used to hold vitamin C effervescent tablets. The effervescent tablet contains a disintegrant and is easy to decompose when exposed to moisture. Therefore, the moisture-proof and tightness of the packaging are relatively high, and the choice of effervescent tube packaging material.The overall performance of the packaging is an important consideration for pharmaceutical companies when choosing packaging. effervescent tablet tube At present, the materials of pharmaceutical packaging generally use polyethylene, polypropylene, polyester and other materials, which have the characteristics of light texture, resistance to most acid and alkali corrosion, easy processing and molding, good sealing performance, and strong impact resistance, which basically meet the requirements of most pharmaceutical packaging. Demand. Polyester material is mostly used for liquid medicine or medicine packaging that requires transparency. The material of the effervescent tube packaging is mainly polypropylene and polyethylene, and the bottle body is made of polypropylene, which can achieve good impact resistance. To protect the safety of medicines, the bottle body of this material has good gloss, which is convenient for printing and labeling. The cap of the effervescent tube is made of polyethylene. This material has good flexibility and heat-seal performance. Its transparency varies with molecular weight. It can achieve a good sealing effect and prevent the intrusion of external water vapor. Prevent the effervescent tablet from being decomposed by moisture. Choosing suitable packaging materials for drugs is the basic requirement to meet their storage needs and ensure the efficacy of the drug during the validity period. The use of different materials for the body and cap of the effervescent tube is to better meet the requirements of the effervescent tablet for sealing. Pharmaceutical companies should fully realize the importance of materials for drug performance when choosing drug packaging, and choose the best.

Silica gel desiccant packaging is commonly used to control the moisture and humidity, and to adsorb HC1, CO2, C12 or aromatic. Desiccant is basically made from silicon dioxide that works efficiently in protecting the food products and pharmaceutical tablets and capsules from moisture inside the packaging tube, bottle or container. Whether you use silica gel in food and medicine, they are harmless and are highly suitable to remove the relative humidity from the packaging environment. To get rid of moisture that may harm your products, you must use the perfect silica gel packets containing white, blue or orange beads based on their level of adsorption capacity. desiccant caps Silica gel is a non-corrosive and non-toxic way of controlling the moisture. They are available in varying volumes and can be obtained in bulk quantities. They are used in variety of applications such as medications, diagnostic kits, dried and freeze goods packaging, food packaging, pharmaceutical packaging and many more.These desiccants can also be used in high frequency radio and satellite transmission system where high quality moisture adsorbents are required to prevent the signal degradation. packaging for effervescent tablets Such type of desiccants provides maximum adsorption capacity and prevents the products from mold, mildew, rust or corrosion by filling the packets with non-indicating silica gel desiccant.